This new mount uses Daessy Adjustable Tube Connectors (ATC75/75), an
updated version of Daessy’s original adjustable connector). Each tube is
secured in the connector with an M6 bolt and the 2 halves of the
connector have an indexing face, fastened with an M8 bolt. This means
that the mount tubes can be connected in 40 different positions through
360 degrees; when adjusting, the tubes can not slide out of the
connector and the connector will not come loose no matter which side of
the wheelchair the mount is attached to..
Available in 3 or 2 length setups, the 2 length version uses a single adjustable connector with a longer first tube.
Overview
Adjustable joints allow 40 different tube positions through 360 degrees.
Quickly removable.
Suitable for most standard wheelchairs.
Locking clamp assembly makes this suitable for use with Tilt in Space wheelchairs and for users with uncontrolled movements, where the lock would prevent accidental removal from the frame clamp.
Fits either side of the wheelchair.
Suitable for devices up to 4kg.
Fits in Medium Mount Carry Bag when joints are loosened.
