Brand: Daessy
Model: ITC1000IP
The default Frame Clamp Inner Piece for LiteMounts when no alternative is specified. Fits 1" round frame, with sleeves available to adapt it to fit 7/8", 3/4", 22mm or 20mm round frame if required.Note: Previous code ITC010-INSleeve OptionsITC875IP: ITC1000IP with sleeves to fit 7/8" round frameITC7..
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: ITC20IP
Frame Clamp Inner Piece for LiteMounts to attach to 20mm round frame.Note: This is an ITC1000IP with sleeves to fit 20mm round frame..
£50.40
Ex Tax:£42.00
Brand: Daessy
Model: ITC22IP
Frame Clamp Inner Piece for LiteMounts to attach to 22mm round frame.Note: This is an ITC1000IPwith sleeves to fit 22mm round frame..
£50.40
Ex Tax:£42.00
Brand: Daessy
Model: ITC750IP
Frame Clamp Inner Piece for LiteMounts to attach to 3/4" round frame.Note: This is an ITC1000IP with sleeves to fit 3/4" round frame..
£50.40
Ex Tax:£42.00
Brand: Daessy
Model: ITC875IP
Frame Clamp Inner Piece for LiteMounts to attach to 7/8" round frame.Note: This is an ITC1000IP with sleeves to fit 7/8" round frame..
£50.40
Ex Tax:£42.00
Brand: Daessy
Model: ITC1250IP
Frame Clamp Inner Piece for LiteMounts, fitting 1.25" round frame...
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: FTSM1000-LIPA
Flat-Topped side mount clamp for 1" / 25mm round tube, for use with a Daessy LiteMount. This is a
similar concept to the FSM1000-LIPA but requires less clear frame, making
it suitable for use on seat frames where the seat base is tight up to
the seat frame.Note: This version has a LiteMount In..
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: 1000FSM-LIPA
Front side-mount clamp for 1" round tube, for use with a Daessy LiteMount.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a Lite Mount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFC1000SM-LIPA
Side-mount frame clamp inner piece for 1" round tube, for use with a Daessy LiteMount.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a Lite Mount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: FTSM875-LIPA
Flat-Topped side mount clamp for 7/8" round tube, for use with a Daessy LiteMount. This is a
similar concept to the FSM875-LIPA but requires less clear frame, making
it suitable for use on seat frames where the seat base is tight up to
the seat frame.Note: This version has a LiteMount Inner Pi..
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: 875FSM-LIPA
Front side-mount clamp for 7/8" round tube, for use with a Daessy LiteMount. This is a 1000FSM-LIPA with sleeves to adapt for 7/8" frame.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a Lite Mount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFC875SM-LIPA
Side-mount frame clamp inner piece for 7/8" round tube, for use with a Daessy LiteMount.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a Lite Mount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: LIPA-TNUT
Used to attach into the rail of various wheelchair seat frames, for use with LiteMounts.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a Lite Mount...
£60.00
Ex Tax:£50.00
Brand: Daessy
Model: N1SM-LIPA
Narrow side mount frame clamp inner piece for 1" round tube.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a Lite Mount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UFCPRTC-LIPA
LiteMount frame clamp inner piece for 2.5" x 1.25" rectangular frame tube.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: 35IVSM-LIPA
Clamps onto rectangular frame with dimensions 35mm x 20mm.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a Lite Mount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: 40IVSM-LIPA
Clamps onto rectangular frame with dimensions 40mm x 20mm.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: MH2-LIPA
Used to bolt onto various wheelchair frames with a LiteMount adaptor.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: SH3-LIPA
For use with LiteMounts. The slot in the SH3/IPA is 3.5” (9cm) long. The SH3/IPA is supplied with bolts to fit M6 threads in wheelchair frame.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: MH3-LIPA
Used to bolt onto various wheelchair frames, with a LiteMount adaptor.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: PA-LIPA
LiteMount frame clamp inner piece for Permobil (not UniTrack).Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: SEDEO-LIPA
LiteMount Frame clamp inner piece to attach onto the original Sunrise Sedeo armrest bracket. The bracket is not included with this single clamp.Note: This is not for the new Q300/Q400/Q500 range of Sedeo frames.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Ser..
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: SEDEO-LIPA+BRACKET
LiteMount Frame clamp inner piece and armrest bracket to attach onto the original Sunrise Sedeo. This combination is only needed if you don't already have the Sedeo
armrest bracket.Note: This is not for the new Q300/Q400/Q500 range of Sedeo frames.Note: This version has a LiteMount Inner Piece Ada..
£186.00
Ex Tax:£155.00
Brand: Daessy
Model: SALSA18-LIPA
LiteMount frame clamp inner piece to attach onto the Quickie Salsa.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: SALSA-EF-LIPA
LiteMount frame clamp inner piece to attach onto a Quickie Salsa that has extended footrest brackets.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£141.60
Ex Tax:£118.00
Brand: Daessy
Model: UTPA-LIPA
LiteMount frame clamp inner piece to attach onto Permobil UniTrack.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£165.60
Ex Tax:£138.00
Brand: Daessy
Model: UTR82-LIPA
LiteMount frame clamp inner piece to attach onto the R82 Cougar. Also fits Combiframe.Note: This version has a LiteMount Inner Piece Adaptor (LIPA) instead of the Standard Series IPA. In this format it is only compatible with a LiteMount...
£76.80
Ex Tax:£64.00
Brand: Daessy
Model: INVSTD-LIPA
LiteMount frame clamp inner piece for Invacare wheelchairs with the
"Standard" seat system (typically older TDX SP and XTR wheelchairs).
This 5 piece clamp featuring a Daessy IPA is attached to the seat pan
and anchored by the armrest support, giving a very solid base for
attaching a Daessy ..
£165.60
Ex Tax:£138.00
Brand: Daessy
Model: LIPA
A required adaptor for attaching a LiteMount to various Standard Series frame clamp inner pieces that use an IPA as standard. The LIPA replaces the IPA to provide the LiteMount attachment interface...
£51.60
Ex Tax:£43.00
Brand: Daessy
Model: LMOL
An adaptor for attaching a LiteMount to various Standard Series frame clamp inner pieces that don't use an IPA. The LMOL provides a LiteMount attachment interface.This is not an offset link in the same way as an O3L is for Standard Series. The LMOL has the Standard Series interface on one side and L..
£51.60
Ex Tax:£43.00
Brand: Daessy
Model: LMSPCR
Increases the width of a LiteMount Clamp Assembly by 0.7 inches (18mm)...
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: LMCQ
LiteMount Outer Assembly, complete with both LMCQ-R (Receiver) and LMCQ-I (Insert)...
£138.00
Ex Tax:£115.00
Brand: Daessy
Model: LMCQ01
Complete LiteMount Frame Clamp Assembly for 1" round tube, with both LMCQ-R (Receiver) and LMCQ-I (Insert) in addition to the ITC1000-IN frame clamp inner piece...
£174.00
Ex Tax:£145.00
Brand: Daessy
Model: AFJ-750
3/4" Ball Joint Clamp for Articulating or Combination LiteMounts.This joint clamps around a 3/4" ball joint at both ends...
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: AFJ-875
7/8" Ball Joint Clamp for Articulating or Combination LiteMounts.This joint clamps around a 7/8" ball joint at both ends...
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: BTS-7
3/4" diameter tube with a single 7/8" ball end for Articulating LiteMounts. The price depends on the length selected.Lengths are available
in 2" increments from 2" up to 18" and can be selected from the option
drop-down. Please note that the prices displayed in the drop-down
include VAT...
£0.00
Ex Tax:£0.00
Brand: Daessy
Model: BT2-6
5/8" diameter tube with a 7/8" ball at one end and 3/4" ball at the other end, for Articulating LiteMounts. The price depends on the length selected.Lengths are available
in 2" increments from 4" up to 12" and can be selected from the option
drop-down. Please note that the prices displayed in th..
£0.00
Ex Tax:£0.00
Brand: Daessy
Model: BTT-6
5/8" diameter tube with a 3/4" ball at each end, for Articulating LiteMounts. The price depends on the length selected.Lengths are available
in 2" increments from 4" up to 12" and can be selected from the option
drop-down. Please note that the prices displayed in the drop-down
include VAT.This..
£0.00
Ex Tax:£0.00
Brand: Daessy
Model: ITC087-IN
The insert half of an Indexing LiteMount Joint, this clamps onto 7/8" tube. The
indexing/hirth "teeth" connect to the teeth of a non-insert clamp for
the next length of tube. It is labelled the 'insert' clamp as it contains the inner thread for the bolt running through both joint clamps to be ti..
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: ITC075-IN
The insert half of an Indexing LiteMount Joint, this clamps onto 3/4" tube. The
indexing/hirth "teeth" connect to the teeth of a non-insert clamp for
the next length of tube. It is labelled the 'insert' clamp as it contains the inner thread for the bolt running through both joint clamps to be ti..
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: ITC062-IN
The insert half of an Indexing LiteMount Joint, this clamps onto 5/8" tube. The
indexing/hirth "teeth" connect to the teeth of a non-insert clamp for
the next length of tube. It is labelled the 'insert' clamp as it contains the inner thread for the bolt running through both joint clamps to be ti..
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: ITC087
The non-insert half of an Indexing Joint, this clamps onto 7/8" tube.
The indexing/hirth "teeth" connect to the teeth of an insert clamp for
the next length of tube.This clamp is labelled the 'non-insert' or 'non-threaded' half of an Indexing Joint as it has no bolt thread insert; the bolt runs ..
£30.00
Ex Tax:£25.00
Brand: Daessy
Model: ITC075
The non-insert half of an Indexing Joint, this clamps onto 3/4" tube.
The indexing/hirth "teeth" connect to the teeth of an insert clamp for
the next length of tube.This clamp is labelled the 'non-insert' or 'non-threaded' half of an Indexing Joint as it has no bolt thread insert; the bolt runs ..
£30.00
Ex Tax:£25.00
Brand: Daessy
Model: ITC062
The non-insert half of an Indexing Joint, this clamps onto 5/8" tube.
The indexing/hirth "teeth" connect to the teeth of an insert clamp for
the next length of tube.This clamp is labelled the 'non-insert' or 'non-threaded' half of an Indexing Joint as it has no bolt thread insert; the bolt runs ..
£30.00
Ex Tax:£25.00
Brand: Daessy
Model: LTS-7
3/4" diameter straight tube for Indexing LiteMounts. The price depends on the length selected.Lengths are available
in 2" increments from 4" up to 18" and can be selected from the option
drop-down. Please note that the prices displayed in the drop-down
include VAT...
£0.00
Ex Tax:£0.00
Brand: Daessy
Model: LTS-6
5/8" diameter straight tube for Indexing LiteMounts. The price depends on the length selected.Lengths are available
in 2" increments from 4" up to 14" and can be selected from the option
drop-down. Please note that the prices displayed in the drop-down
include VAT...
£0.00
Ex Tax:£0.00
Brand: Daessy
Model: BTS-6
5/8" diameter tube with a single 3/4" ball end for Indexing LiteMounts. The price depends on the length selected. The ball end of this tube enables connection into a 3/4" ball joint for a LiteMount end fitting.Lengths are available
in 2" increments from 4" up to 14" and can be selected from the op..
£0.00
Ex Tax:£0.00
Brand: Daessy
Model: LEF75-AQR
Small faced quick-release base for use with LiteMounts. The 3/4" ball ends connects to the normal 3/4" ball joint at the top of a LiteMount and gives it articulating functionality...
£90.00
Ex Tax:£75.00
Brand: Daessy
Model: LEF87-AQR
Small faced quick-release base for use with custom LiteMounts. The 7/8" ball ends connects to a 7/8" ball joint at the top of a LiteMount and gives it articulating functionality.Note: This requires a 7/8" top ball joint, not the normal 3/4" ball joint found in typical LiteMount configurations...
£90.00
Ex Tax:£75.00
Brand: Daessy
Model: LEF75-FL-BB
End Fitting for a Buddy Button switch, for use with LiteMounts. This plate has a
3/4" ball for connection with a 3/4" LiteMount ball joint...
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: LEF75-FL-JB
End Fitting for a Jellybean switch, for use with LiteMounts. This plate has a
3/4" ball for connection with a 3/4" LiteMount ball joint...
£36.00
Ex Tax:£30.00
Brand: Daessy
Model: LEF75-THF
LiteMount end fitting that can be used with either external or internal 1/4" 'camera thread'. The end fitting is supplied with a bolt that can be
attached to provide an external thread or removed to use the internal
thread.This end fitting has a 3/4" ball for connection to a 3/4" LiteMount ball ..
£25.20
Ex Tax:£21.00
Brand: Daessy
Model: LEF87-THF
LiteMount end fitting that can be used with either external or internal 1/4" 'camera thread'. The end fitting is supplied with a bolt that can be
attached to provide an external thread or removed to use the internal
thread.This end fitting has a 7/8" ball for connection to a 7/8" LiteMount ball ..
£25.20
Ex Tax:£21.00
Brand: Manfrotto
Model: LEF75-CAM323
Manfrotto Quick-change camera plate for use as a LiteMount end fitting.This end fitting has a 3/4" ball for connection to a 3/4" LiteMount ball joint...
£85.20
Ex Tax:£71.00
Brand: Daessy
Model: LEF75-RAM4X
LiteMount end fitting for attaching RAM Mount holders with 2 or 4 holes.This end fitting has a 3/4" ball for connection to a 3/4" LiteMount ball joint...
£64.80
Ex Tax:£54.00
Brand: Daessy
Model: LEF87-RAM4X
LiteMount end fitting for attaching RAM Mount holders with 2 or 4 holes.This end fitting has a 7/8" ball for connection to a 7/8" LiteMount ball joint...
£64.80
Ex Tax:£54.00
Brand: RAM
Model: LEF75-RAMSLC
Adapted RAM self-levelling cup holder with insulator for use with LiteMounts.This end fitting has a 3/4" ball for connection to a 3/4" LiteMount ball joint...
£43.20
Ex Tax:£36.00
Brand: RAM
Model: LEF87-RAMSLC
Adapted RAM self-levelling cup holder with insulator for use with LiteMounts.This end fitting has a 7/8" ball for connection to a 7/8" LiteMount ball joint...
£43.20
Ex Tax:£36.00