Swing-Aside Mount

The Swing-Aside Mount enables the user to swing the mount and device away when not needed without needing to rely on care staff by releasing the cable beneath the horizontal tube and pushing the mount away. It rotates at the elbow joint so the horizontal tube and top part of the connector swivel around the vertical tube. The rotate function allows the mount to swing away and lock at 90 deg (pointing forwards) and 270 deg (pointing backwards); the mount has a safety feature that prevents it being able to swing back towards the user.  

The Locking Outer Assembly allows the removable mount to be ‘locked’ into the frame clamp so that it is held securely in position and cannot accidentally swing loose, making it suitable for use on chairs with tilting seat systems.

Overview

• Ideally suited to users with some independence and able to transfer unaided – no need to rely on a helper to move the mount away or back again.
• Release the cable lock to swing away and lock into a choice of 3 positions.
• Can not swing back towards the user when the cable lock is released.
• Fits either side of the wheelchair.
• Suitable for most standard wheelchairs including Tilt-in Space Wheelchairs.
• Quickly removed from the wheelchair.
• Suitable for devices up to 8kg.
• Not suitable for use with the OSS Opposite Side Support.
   

Components*

• 1x Offset Link (O3L)
• 1x Locking Outer Assembly (ROP/RFCR)
• 1x Upright S-Bent Tube (S24-3 as standard)
• 1x Rotate joint, Release Cable and 16” horizontal tube (LSARH/TM/16)

* Components listed above are for standard configuration. Exact components may differ slightly to meet specific requirements.

Frame Clamp Inner Piece and Quick-Release Base (From Feb 2023)

We no longer include a Frame Clamp Inner Piece or Quick-Release Base in a mount by default. With changes to wheelchairs and other equipment over the years there is now a wide variety and it is no longer appropriate for a 1" round frame clamp and standard TUSB to be a default inclusion.

When ordering a full mount the Frame Clamp Inner Piece and Quick-Release Base are to be ordered separately, with our full range available.

Wheelchair Information and Custom Requirements

We ask for details of the Wheelchair the mount is intended to be used with in order to ensure that the supplied Frame Clamp is correct for that chair.

If you have any questions, or wish to discuss custom requirements, please don't hesitate to contact us.