Brand: Daessy
Model: ROP/RFCR
Both halves of the Locking Outer Assembly for Standard Series, including both the Locking Frame Clamp Outer Piece (RFCR) and the Removable Outer Connector (ROP).Used in the following Standard Series mounts:Locking Bent Pole Rigid Mount (DLRMRT)Locking Rigid Mount (DLRM)Locking Side Folding Mount (DT..
£230.40
Ex Tax:£192.00
Brand: Daessy
Model: AHOP/RFCR
Both halves of the Locking Outer Assembly for Standard Series Height Adjustable mounts, including both the Locking Frame Clamp Outer Piece (RFCR) and the Removable Outer Connector for Height Adjust (AHOP).Used in the following Standard Series mounts:Height Adjustable Rigid Mount (AH/DRM)Height Adjus..
£243.60
Ex Tax:£203.00
Brand: Daessy
Model: RFCI/RFCR
Both halves of the Locking Outer Assembly for the Standard Series Rear Folding Mount, including both the Locking Frame Clamp Outer Piece (RFCR) and the Removable Outer Connector for Rear Folding (RFCI).Used in the following Standard Series mounts:Locking Rear Folding Mount (DLRFM)..
£178.80
Ex Tax:£149.00
Brand: Daessy
Model: 90L
A joint allowing two 7/8" tubes to cross each other at a 90 degree angle...
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: 135L
A joint allowing two 7/8" tubes to cross each other at a 135 degree angle...
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: 180L
A joint allowing two 7/8" tubes to be stacked at a 180 degree angle - one tube will run on top of the other, with a small gap between the two...
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: TC90
'Elbow' connector for the Standard Series Rigid Mount (DRM1), Locking Rigid Mount (DLRM) and Height Adjustable version (AH/DRM).The TC90 enables two 7/8" tubes to be connected to each other at a 90 degree angle without offset; they don't cross each other...
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: TC90A
A "T" shape connector enabling two 7/8" tubes to be connected to each other at a 90 degree angle. Unlike the normal TC90 where the tubes meet at the ends in a 'corner' joint, the TC90A allows the end of one tube to be connected anywhere along the length of the other...
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: TC135A
A "Y" shape connector enabling two 7/8" tubes to be connected to each other at a 135 degree angle. The TC135A allows the end of one tube to be connected anywhere along the length of the other and branch off at 135 degrees (or 45 degrees for the acute angle) without the two tubes crossing...
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: TC180A
A connector enabling two 7/8" tubes to be connected parallel to each other with a small gap between them...
£127.20
Ex Tax:£106.00
Brand: Daessy
Model: ATC87-87
The Daessy Adjustable Tube Connector is an updated version of
Daessy’s original adjustable connector. Each tube is secured in its half of the
connector with an M6 bolt and the 2 halves of the connector have an
indexing face connected together with an M8 bolt. This allows the 2
mo..
£174.00
Ex Tax:£145.00
Brand: Daessy
Model: ATC87-75
The Daessy Adjustable Tube Connector is an updated version of
Daessy’s original adjustable connector. Each tube is secured in its half of the
connector with an M6 bolt and the 2 halves of the connector have an
indexing face connected together with an M8 bolt. This allows the 2
mo..
£174.00
Ex Tax:£145.00
Brand: Daessy
Model: RTH+2RTHTM
Complete Side Folding Mechanism (with 2 Tube Mounts) for Standard Series Side Folding Mount (DFM2) and Locking Side Folding Mount (DTSFM).Tube not included (shown on image for reference only)..
£478.80
Ex Tax:£399.00
Brand: Daessy
Model: AHC1
This clamp is attached to the top of the 1" diameter upright tube on
Standard Series height adjustable mounts. The handle can be turned to
unlock the next length of 7/8" tube for height adjustment and then
locked when in the required position.Note: This does not include the separate Adjustable..
£168.00
Ex Tax:£140.00
Brand: Daessy
Model: AHLC
This Limit Collar is used on Standard Series height adjustable mounts.
Attached to the 7/8" diameter tube that is adjusted for height it sets
the point at which the tube cannot be lowered further, connecting with
the AHC1 clamp at that point.Note: This does not include the Adjustable Height Cl..
£103.20
Ex Tax:£86.00
Brand: Daessy
Model: ELRH/RTHTM
Elbow Rotate Head for the Locking Rear Folding Mount (DLRFM)...
£289.20
Ex Tax:£241.00
Brand: Daessy
Model: LRFA/L
Locking Rear Folding mechanism for the LEFT side of a wheelchair. Complete adaptor with Lock, Tube Mount and Offset Link.Only used with the Standard Series Locking Rear Folding Mount (DLRFM)...
£474.00
Ex Tax:£395.00
Brand: Daessy
Model: LRFA/R
Locking Rear Folding mechanism for the RIGHT side of a wheelchair. Complete adaptor with Lock, Tube Mount and Offset Link.Only used with the Standard Series Locking Rear Folding Mount (DLRFM)...
£474.00
Ex Tax:£395.00
Brand: Daessy
Model: LOCK/L
Lock only for a LEFT sided Locking Rear Folding adaptor.Note: This is only the lock, not the complete adaptor / rear folding mechanism...
£147.60
Ex Tax:£123.00
Brand: Daessy
Model: LOCK/R
Lock only for a RIGHT sided Locking Rear Folding adaptor.Note: This is only the lock, not the complete adaptor / rear folding mechanism...
£147.60
Ex Tax:£123.00
Brand: Daessy
Model: DSAM-ARM
Also known as LSARH/TM/16, this is the complete Swing-Aside Arm consisting of a Rotate Head, Tube Mount, 16" Tube and Release Cable for the Swing-Aside Mount (DSAM4).Please note: This is only available as a complete assembled unit...
£504.00
Ex Tax:£420.00
Brand: Daessy
Model: WCA-20
Device adaptor for Tobii I-13 and I-16 to fit onto a Daessy quick
release base.Please note: This needs to be used with a Small faced
quick release base as the shape of the devices means they will not fit onto a Large faced quick
release base...
£150.00
Ex Tax:£125.00
Brand: Daessy
Model: M75T90A
A "T" shape connector for the M-Series Rigid Mount (M75-RM) enabling two 3/4" tubes to be connected to each
other at a 90 degree angle. The M75T90A allows the end of one tube to
be connected anywhere along the length of the other...
£111.60
Ex Tax:£93.00
Brand: Daessy
Model: ATC75-75
The Daessy Adjustable Tube Connector is an updated version of
Daessy’s original adjustable connector. Each tube is secured in its half of the
connector with an M6 bolt and the 2 halves of the connector have an
indexing face connected together with an M8 bolt. This allows the 2
mo..
£174.00
Ex Tax:£145.00
Brand: Daessy
Model: TBS32
This mounting plate attaches to a Tobii S32 to enable secure connection to a Daessy Quick Release Base on a mount. Also fits 75x75 VESA fixings...
£162.00
Ex Tax:£135.00
Brand: Daessy
Model: M75FJ
Complete Side Folding Mechanism (with 2 Tube Mounts)
for M-Series Side Folding Mount (M75-FM). Compatible with 3/4" tubes.Tube not included (shown on image for reference only)..
£478.80
Ex Tax:£399.00
Brand: Daessy
Model: M75AHLC
Height Adjustment Limit Collar for M-Series Adjustable Mount (M75-AM)...
£75.60
Ex Tax:£63.00
Brand: Daessy
Model: M75PPJ
Push-Pull Joint/Mechanism for M-Series Push-Pull Mount (M75-PPM). Also known by the code M75LSJ...
£478.80
Ex Tax:£399.00
Brand: Daessy
Model: MDMT
This adaptor enables custom adaptations to securely connect a device to a
Daessy Quick Release Base on a mount. This may be suitable if the
device does not have a specific matching mounting plate...
£114.00
Ex Tax:£95.00
Brand: Daessy
Model: QRP1
This adaptor is an option for custom adaptations to securely connect a device to a
Daessy Quick Release Base on a mount. This may be suitable if the
device does not have a specific matching mounting plate...
£114.00
Ex Tax:£95.00
Brand: Daessy
Model: PRC7
This adaptor attaches to a Prentke Romich device to enable secure
connection to a Daessy Quick Release Base on a mount...
£150.00
Ex Tax:£125.00
Brand: Daessy
Model: 3SA-NC
This adaptor attaches to a Saltillo Novachat with 3 hole fixings, to enable secure
connection to a Daessy Quick Release Base on a mount...
£156.00
Ex Tax:£130.00
Brand: Daessy
Model: MQR75
The basic Quick Release Base for 3/4" tube on M-Series mounts...
£186.00
Ex Tax:£155.00
Brand: Daessy
Model: MAQR75
Articulating Quick Release Base for 3/4" tube on M-Series mounts. Both tube attachment and ball joint are adjusted with bolt and allen key, no handles supplied with this version.As an M-Series Quick-Release Base this has a small face...
£276.00
Ex Tax:£230.00
Brand: Daessy
Model: VMAD
This mounting plate attaches to a VESA compatible device to enable secure connection to a Daessy Quick Release
Base on a mount.VESA Compatibility
Vesa 75 x 75 (7.5cm)
Vesa 100 x 100 (10cm)..
£150.00
Ex Tax:£125.00
Brand: Daessy
Model: MAQR75-1H
1-Handle Articulating Quick Release Base for 3/4" tube on M-Series mounts. The face angle (ball joint) is adjusted with the included side handle
while the rear attachment to the tube is with bolt and allen key.As an M-Series Quick-Release Base this has a small face...
£288.00
Ex Tax:£240.00
Brand: Daessy
Model: MAQR75-2H
2-Handle Articulating Quick Release Base for 3/4" tube on M-Series mounts. Both the face angle (ball joint) and the rear tube attachment are adjusted by handles.As an M-Series Quick-Release Base this has a small face...
£300.00
Ex Tax:£250.00
Brand: Daessy
Model: V75TA
This mounting plate attaches to a VESA 75 compatible device to enable secure connection to a Daessy Quick Release
Base on a mount. As a 'twist' adapter it will rotate between portrait and landscape orientation...
£204.00
Ex Tax:£170.00
Brand: Daessy
Model: IPH
Mounting plate for devices with 4" x 4" imperial fixings. This plate
features 4-way mounting, allowing a device to be reconnected to a quick
release base to change between portrait and landscape orientation
without having to remove the mounting plate from the device...
£114.00
Ex Tax:£95.00
Brand: Daessy
Model: MRCQ75
Specifically designed for compatibility with devices that already
have a Wedge adaptor. A ball joint makes multiple angle and tilt
adjustments possible. This version is without handles, requiring an
allen key to adjust the position.Fits 3/4" tube.Note: The
Wedge interface is only compatible ..
£294.00
Ex Tax:£245.00
Brand: Daessy
Model: IPHTA
Mounting plate for devices with 4" x 4" imperial fixings. This plate
features a twist function, allowing a device to be rotated between
portrait and landscape orientation while remaining on the mount...
£204.00
Ex Tax:£170.00
Brand: Daessy
Model: MRCQ75-1H
Specifically designed for compatibility with devices that already
have a Wedge adaptor. A ball joint makes multiple angle and tilt
adjustments possible. This version includes a single handle on the ball
joint to make adjustment easier, not requiring an allen key.Fits 3/4" tube.Note:
The Wedg..
£306.00
Ex Tax:£255.00
Brand: Daessy
Model: MRCQ75-2H
Specifically designed for compatibility with devices that already
have a Wedge adaptor. A ball joint makes multiple angle and tilt
adjustments possible. This version includes two handles to make
adjustment easier, not
requiring an allen key; One on the ball joint and a second on the tube
c..
£318.00
Ex Tax:£265.00
Brand: Daessy
Model: TUSB
The TUSB is the standard Quick-Release Base for Standard
Series wheelchair mounts; previously the default inclusion in most mounts. The angle can be set before tightening with an allen key,
and is then in a fixed position unless adjusted manually.Fits onto 7/8" tube...
£186.00
Ex Tax:£155.00
Brand: Daessy
Model: MUSB
A smaller version of the Standard Quick Release Base (TUSB), suitable for most smaller and medium devices.Note: This is NOT the MQR-75 Quick Release Base for M-series mounts...
£186.00
Ex Tax:£155.00
Brand: Daessy
Model: TUSBA
This Quick-Release Base allows an attached device to be rotated sideways and then secured in this tilted position.Fits onto 7/8" tube...
£279.60
Ex Tax:£233.00
Brand: Daessy
Model: USBF
The Folding Quick Release Base provides real-time adjustment to
rotate the angle around the horizontal mount tube without requiring
tools.
Attaches onto 7/8” Tube
Change the angle at any time (90 deg in 6 stops) by using second ring-pull.
The retractable lock-pin secures each positio..
£304.80
Ex Tax:£254.00
Brand: Daessy
Model: FAQRB
The face of the FAQRB can be rotated simply by turning the device.Note: Not suitable for use with MYTOBII P10 or other similar
style devices which are large, heavy and where the mounting plate
attaches to the bottom of the device...
£216.00
Ex Tax:£180.00
Brand: Daessy
Model: AQRL87
A ball joint makes multiple angle and tilt adjustments possible. The large face makes it suitable for full size devices. This version is without handles, requiring an allen key to adjust the position.Fits 7/8" tube...
£276.00
Ex Tax:£230.00
Brand: Daessy
Model: AQRL87-1H
A ball joint makes multiple angle and tilt adjustments possible. The large face makes it suitable for full size devices. This version includes a single handle on the ball joint to make adjustment easier, not requiring an allen key.Fits 7/8" tube...
£288.00
Ex Tax:£240.00
Brand: Daessy
Model: AQRL87-2H
A ball joint makes multiple angle and tilt adjustments possible. The large face makes it suitable for full size devices. This version includes two handles to make adjustment easier, not requiring an allen key; One on the ball joint and a second on the tube clamp.Fits 7/8" tube...
£300.00
Ex Tax:£250.00
Brand: Daessy
Model: AQRS87
A ball joint makes multiple angle and tilt adjustments possible. The small face makes it suitable for smaller devices where a large face may be too big. This version is without handles, requiring an allen key to adjust the position.Fits 7/8" tube...
£276.00
Ex Tax:£230.00
Brand: Daessy
Model: AQRS87-1H
A ball joint makes multiple angle and tilt adjustments possible. The small face makes it suitable for smaller devices where a large face may be too big. This version includes a single handle on the ball joint to make adjustment easier, not requiring an allen key.Fits 7/8" tube...
£288.00
Ex Tax:£240.00
Brand: Daessy
Model: AQRS87-2H
A ball joint makes multiple angle and tilt adjustments possible. The small face makes it suitable for smaller devices where a large face may be too big. This version includes two handles to make adjustment easier, not requiring an allen key; One on the ball joint and a second on the tube clamp.Fits..
£300.00
Ex Tax:£250.00
Brand: Daessy
Model: RCQ87
Specifically designed for compatibility with devices that already have a Wedge adaptor. A ball joint makes multiple angle and tilt adjustments possible. This version is without handles, requiring an allen key to adjust the position.Fits 7/8" tube.Note: The Wedge interface is only compatible with Wed..
£294.00
Ex Tax:£245.00
Brand: Daessy
Model: RCQ87-1H
Specifically designed for compatibility with devices that already have a Wedge adaptor. A ball joint makes multiple angle and tilt adjustments possible. This version includes a single handle on the ball joint to make adjustment easier, not requiring an allen key.Fits 7/8" tube.Note: The Wedge interf..
£306.00
Ex Tax:£255.00
Brand: Daessy
Model: RCQ87-2H
Specifically designed for compatibility with devices that already have a Wedge adaptor. A ball joint makes multiple angle and tilt adjustments possible. This version includes two handles to make adjustment easier, not
requiring an allen key; One on the ball joint and a second on the tube
clamp.F..
£318.00
Ex Tax:£265.00
Brand: Daessy
Model: DSAROM
The DSAROM has an easy adjustable monitor-style arm which
can be moved into different positions by hand only, without use of any tools
once the spring-arm tension has been set. Suitable for devices 0.9kg to 6.8kgThe DSAROM is on a small Rolling Mount Base 29.5”w x 26.5”d
(75cm x 67cm).Maximum hei..
£1,500.00
Ex Tax:£1,250.00
Brand: Daessy
Model: ITC1000IP
The default Frame Clamp Inner Piece for LiteMounts when no alternative is specified. Fits 1" round frame, with sleeves available to adapt it to fit 7/8", 3/4", 22mm or 20mm round frame if required.Note: Previous code ITC010-INSleeve OptionsITC875IP: ITC1000IP with sleeves to fit 7/8" round frameITC7..
£36.00
Ex Tax:£30.00